Magnetic Navigation Sensor 16-bit
MGS-N16
The Magnetic navigation sensor MGS-N16 is developed for AGV use, according to the application characteristics of AGVs, we fully consider the various problems of magnetic navigation sensors in AGV applications for targeted solutions or improvements, such as smaller size, Increase the induction sensitivity adjustment, N\S pole magnetic stripe compatible induction, increase a variety of communication methods, etc., so that the magnetic navigation sensor in the use of AGV can run more stably in various complex projects.
It has fluxgate technology, displacement signal output, detection accuracy up to 1mm, detection response time 5ms, N-pole magnetic stripe and S-pole magnetic stripe detection, sensitivity adjustable, support RS-232, CAN Open, RS485-Modbus-RTU.
- Using fluxgate technology, compared with the traditional Hall detection sensor, it solves the temperature drift problem, and the signal detection is more stable and reliable. The signal acquisition point with 10mm spacing, the signal detection output response time is less than 5ms, which can be used for track correction at high speed.
- Compatible detection of N pole magnetic stripe and S pole magnetic stripe, a total of 10 sensitivity adjustment gears from 0 to 9 can be set to adapt to different installation heights. If the hardware is abnormal, the output will be stopped actively.
- Compact structure design, internal silicone potting, reliable detection under high frequency vibration.
- It supports three output modes: RS-232, CAN Open, RS485-Modbus-RTU, and supports the interconnection of multiple devices.
- The operating environment temperature can reach -10℃~+50℃, and the protection grade is IP67, which can meet most of the harsh operating environments.
| Model | MGS-N16 |
| VoltageRated： | 24V±10% |
| Operating voltage range： | 8-32V |
| Detection point distance: | 10mm |
| Output switch points*: | 16 switch points |
| Output switch output: | √ |
| Magnetic stripe position deviation data: | √ |
| Magnetic field intensity detection data: | √ |
| Sensing polarity: | N pole、S pole、NS pole（software is configurable） |
| Sensor sensitivity: | Level 0-9（software is configurable） |
| Detection height: | 0-50mm（suggest installation height: 25mm） |
| Detection range* | ±75mm |
| Detection accuracy* | 1mm（systematic error: 1mm） |
| Detection magnetic stripe/nails: | 3 |
| Suggest magnetic stripe specifications: | Width 30mm、height 1.2mm；width 50mm、height 1.2mm |
| Suggest magnetic nail specifications: | Height 6mm、diameter 12mm |
| Route selection: | √（right, left and straight） |
| LED indicate: | Red and green LED indicate |
| Communication port and protocol: | RS232-HS 19200bps,115200bps RS485-HS 9600bps-115200bps RS485-MODBUS 9600bps-115200bps CAN-HS CAN 2.0A、CANOPEN |
| Cable length: Standard 1.5 （can choose 3m and 6m） |
