BLDC Drivers
BLD30HB
18-70V wide voltage design, dual control, single output current 30A, support to drive different brands of brushless DC motors, innovative steering wheel automatic change,
Integrated speed closed loop, angle closed loop control, reduce control difficulty, support Hall sensor feedback , Support I0+ analog voltage, RS232-HS, RS485-HS, RS485- Modbus, CAN-HS, CANOPEN control.
Features
Details
Drawings
Applications
Supports
Features
Details
| Product | BLDC Drivers |
| Model | BLD30HB |
| Rated voltage: | 16-60V |
| Rated current: | 30A single channel, 60A peak value for 5S |
| Number of driving motors: | 2 |
| IO+ analog voltage control: | Support |
| RS232-HS: | Support |
| RS485-HS: | Support |
| RS485-MODBUS: | MODBUS RTU |
| CAN-HS: | CAN 2.0A |
| CANOPEN: | Support |
| Drive motor type: | DC brushless motor |
| Suitable AGV type: | magnetic navigation / QR code / laser differential / steering wheel type AGV |
| Hall sensor electrical angle: | 120° |
| Moving feedback: | Hall sensor with brushless motor |
| Steering feedback: | Hall sensor with brushless motor |
| Motor angle closed loop control: | Support |
| Motor speed closed loop control: | Support |
| Number of motor pole pairs: | 2-10 pole pairs (software configurable) |
| Operating temperature: | -10℃-+50℃ |
| Operating humidity: | <85%RH |
| Undervoltage protection: | 20V (18V-48V software configurable) |
| Overvoltage protection: | 60V (26V-70V software configurable) |
| Motor rated speed: | 1000-8000r/min (configurable) |
| Minimum speed: | 10-1000r/min (configurable) |
| Communication interruption protection time: | 50ms-2000ms (software configurable) |
| Power output protection: | Support |
| Motor short circuit protection: | Support |
| Motor overload: | Support |
| Overcurrent protection: | Support |
| Motor stall protection: | Support |
| Sensor error protection: | Support |
| Back-EMF protection: | Support |
| Brake control: | Support |
| The output voltage of the brake port: | Equal to the power input voltage |
| Output current of brake port: | 1.8A |
Drawings
Applications
Supports