BLDC Drivers
BLD2LNC
Integrated magnetic stripe navigation function, support two-magnetic-stripes signal input, two-way operation control.
Support seamless dual drive control upgrade, multiple status data feedback, multiple motors and off-line protection support; IO analog, RS232, RS485, CAN BUS control mode, RS485 modbus protocol
Features
Details
Drawings
Applications
Supports
Features
Details
| Product | BLDC Drivers |
| Model | BLD2LNC |
| IO+ analog voltage control: | Support |
| RS232-HS: | Support |
| RS485-HS: | Support |
| RS485-MODBUS: | Support |
| CNA-HS: | CAN 2.0A |
| Drive motor type: | DC brushless motor |
| Suitable AGV type: | Differential magnetic navigation AGV |
| Hall sensor electrical angle: | 120° |
| Rated voltage: | DC24V±10% |
| Adapted motor power: | Single channel 20W-100W configurable, resolution 1W |
| Number of driving motors: | 2 |
| Number of motor pole pairs: | 2-10 pole pairs (software configurable) |
| Operating temperature: | -10°-+50° |
| Operating humidity: | <85%RH |
| Undervoltage protection: | 22V (12V-22V software configurable) |
| Overvoltage protection: | 28V (24V-34V software configurable) |
| Power reverse connection protection: | Support |
| Speed adjustment range: | 100-3000r/min |
| Acceleration time: | 0.1s |
| Deceleration time: | 0.1s |
| Communication interruption protection time: | 50ms-1000ms (software configurable) |
| Power output protection: | Support |
| Motor short circuit protection: | Support |
| Motor overload: | Support |
| Overcurrent protection: | Support |
| Motor stall protection: | Support |
| Sensor error protection: | Support |
| Back-EMF protection: | Support |
| Output voltage of brake port: | 24V |
| Brake port output current: | 1A |
Drawings
Applications
Supports